Using microfabrication to explore CO2 reduction

One promising way to lower atmospheric levels of CO2 is to convert it to something useful such as CO, a starting material for making valuable hydrocarbons. Researchers have shown that catalysts combining copper and indium can drive that conversion electrochemically, but mechanistic details have remained elusive, thwarting efforts to improve the process. By using microfabrication techniques to make highly ordered catalytic electrodes, chemists in Switzerland have uncovered new details about the active phase of the catalysts that facilitate the reaction (Nat. Commun. 2018, DOI: 10.1038/s41467-018-03980-9). Microfabrication methods usually help manufacturers make tiny integrated circuits. Javier Pérez-Ramírez of ETH Zurich and co-workers used the procedures, instead, to make model electrodes patterned with millions of precisely arranged copper and indium catalytic islands. The team had suspected that some unrecognised synergistic interfacial effect involving the metals and their oxides was key to reducing CO2. To test that hypothesis, they prepared electrodes consisting of microscopic indium oxide islands on a copper support (denoted In2O3/Cu). The researchers also made In2O3/Cu2O and In/Cu2O electrodes and varied the size of the islands to control the size of the island-support interfaces. The chemists found that the highest catalytic activity occurs at the interface between copper oxide and indium in regions that are low in indium and that form under reaction conditions. CO2 reduction is approaching commercialisation, says Brian Seger, a catalysis specialist at Technical University of Denmark, and “this study provides interesting results that should help us better understand the underlying mechanism.”

Chemical & Engineering News, 26 April 2018 ; http://pubs.acs.org/cen/news

Posted in Uncategorized